ACRAWAX®C
N,N’ Ethylene Bisstearamide
Physical Properties FORM
物理性質 形式
Beaded Prilled Powdered Atomized
珠狀 粒狀 粉狀 霧狀
Acid Value................................................8 Max. 7 Max. 6Max. 6 Max.
(酸值)
Color,Gardner...........................................5 Max. 4 Max. 3Max. 5 Max.
(顏色，Gardner)
Melting point，°C.................................140-145 140-145 140-145 140-145
(熔點，°C)
Neutralization Value.................................2.0 2.0 2.0 2.0
(中和值)
ACRAWAX C is also available in a 33% aqueous dispersion.
ACRAWAX C 也可提供含量為33%的懸浮液。
Specifications and analytical methods are available upon request.
需要時可以提供說明及分析方法。
Screen Test %
粒度分布
On 10 mesh, %........................................10 Max. ---- ---- ----
On 40 mesh, %.........................................---- 2 Max. ---- ----
On 100 mesh%........................................90 Min. ---- 1 Max. ----
On 325 mesh,%........................................---- 98 Min. ---- 1 Max.
(325 目，%)
Typical Properties
典型性質
Flash Point, °C..........................................285 285 285 285
(閃點，°C)
90% of Particles(microns) .........................---- --- <140 <13
(90%的微粒，微米)
Mean Particles Size(microns) ..................570 130 40 6
(平均粒子大小，微米)
Page 2 of 2
High decomposition point--300-360℃, enables its use in a wild range of temperature without degradation. Unique
producing tech--spray drying, makes the particles spherical and consistent, thus blends with polymers perform more
uniform than usual additives, shortening of blending-time, and improvement of productive efficiency. Impart an
excellent balance of in- and ex- lubricity, improve processing and final products properties.
分解溫度300-360℃,使它可應用于一個廣泛的溫度范圍內,而不用擔心降解. 獨特的生產工藝—噴
霧干燥,生產出來的顆粒呈球狀且均一, 與聚合物的混合較一般的添加劑均勻; 同時可縮短混合時
間, 提高生產效率. 作為一個保持內外潤滑平衡的塑料添加劑, 它可以明顯改善加工性能及制品
的品質.
Suggested Applications
應用范圍
ACRAWAX C is an effective lubricant, processing aid, slip additive for most polymers including ABS, acetal, PVC,
polypropylene, nylon, polyethylene and thermoplastic polyester. At the same time, help certain ingredients, such as
pigments and fillers, disperse more evenly, save costs and avoid the effects on physical properties The typical loading
is 0.1-3.0%.
作為一個有效的潤滑劑、加工助劑、爽滑劑.
PVC、PP、PA、PE 和熱塑性聚酯;同時它可促使顏料、充填劑等在基質中的分散更均勻，節約成本
的同時避免物性受損; 建議添加量0.1-3.0%。
ACRAWAX C Powdered or Atomized is traditionally used as a lubricant and binder for cold compaction of powdered
metal parts.
粉狀或霧狀的ACRAWAX C 通常用于粉末金屬零件冷壓過程的潤滑劑與粘合劑。
Packaging
包裝 Beaded Prilled Powdered Atomized
珠狀 粒狀 粉狀 霧狀
50#Bag 50#Bag 50#Bag ----
(50 磅/包) (50 磅/包) (50 磅/包) ----
250#Drum 225#Drum 150#Box 100#Box
(250 磅/桶) (225 磅/桶) (150 磅/箱) (100 磅/箱)
2000#Sack 2000#Sack ---- ----
(2000 磅/袋) (2000 磅/袋) ---- ----
Manufacturing Location
產地
Williamsport, Pennsylvania, U.S.A.